©2012-2019 CAMDII. Power by MEGtech

1/2

Power Pro

US$19.95

Power Pro is used to instead hardware kit, it is the easiest way to power the device in vehicle when parking.

Connect the power cables to vehicle battery and push the switch, the Power Pro will provide power to your device immediately, and auto cut off power when it detected vehicle battery drop to setting drain level or reach the setting parking delay timer when vehicle parking.

Get your device up and running in minutes.

input: 12V or 24V DC

output: cigar socket 36W + USB 10W + QC 24W, total 70W

battery drain cut off setting:

11.8V/12.0V/12.2V/12.4V or double

parking delay cut off setting:

5 minutes to infinite

1/3

Power Plus

US$17.95

Power Plus is used to instead hardware kit, it is the easiest way to power the device in vehicle when parking.

Connect the power cables to vehicle battery and push the switch, the Power Plus will provide power to your device immediately, and auto cut off power when it detected vehicle battery drop to setting drain level or reach the setting parking delay timer when vehicle parking.

Get your device up and running in minutes.

input: 12V or 24V DC

output: USB 10W + QC 24W, total 34Walt

battery drain cut off setting:

11.8V/12.0V/12.2V/12.4V or double

parking delay cut off setting:

5 minutes to infinite

1/5

Hardwire Kit

US$12.95

Power Plus is used to power the device in vehicle when parking.

Connect the power cables to vehicle battery and ACC circuit, the hardwire kit will provide power to your device immediately, and transmit parking signal once vehicle parked so the device will enter parking mode.

The hardwire kit will auto cut off output when it detected vehicle battery drop to setting drain level while vehicle parking, thus protecting your vehicle battery.

input: 12V or 24V DC

output: 5V 2A

battery drain cut off setting:

11.8V/12.0V/12.2V/12.4V or double

1/5

OBD Driver

US$19.95

OBD Driver is used to instead hardware kit to power the device in vehicle, it will auto receive and analyze the vehicle OBD II data and transmit when vehicle driving.

Plug the OBD Driver into vehicle OBD socket and push the switch, the OBD Driver will provide power to your device immediately, and auto cut off output when it detected vehicle battery drop to setting drain level, thus protecting your vehicle battery.

Easy install easy go!

power output: 5V 2A

battery drain cut off setting:

11.8V/12.0V/12.2V/12.4V or double

support OBD protocols:

ISO9141-2 5 baud init auto    ISO15765 ID 11bits 500kb

ISO14230 5 baud 10.4kb/s     ISO15765 ID 29bits 500kb

ISO14230 fast init 10.4kb/s    ISO15765 ID 11bits 250kb

J1850 PWM 41.6kb/s Ford     ISO15765 ID 29bits 250kb

J1850 VPW 10.4kb/s GM/Chrysler